Bride & Groom Champagne Flute DIY
Calling all wedding planners and DIY brides! Itching to have the wedding champagne toast in style without that hefty price tag? You're in luck! We have a fun, simple, and inexpensive, yes, inexpensive, the bride and groom champagne flute DIY that is swoon-worthy.
Yields: 10 champagne flute DIYs Approximate cost per champagne flute DIY: $4.25
What you need:
- Scissors
- Hot glue gun
- Champagne flutes - we used Classicware
- White tulle
- Silver diamond mesh
- Silver diamond flower mesh
- White 3/8" grosgrain ribbon
- Red 3/8" grosgrain ribbon
- Black 3/8" grosgrain ribbon
Step 1: Wrap 3/8" black grosgrain ribbon around the stem of the champagne flute and glue to hold in place.
Step 2: Wrap the 3/8" white grosgrain ribbon around the top of the stem one time.
Step 3: Cut a piece of the 3/8" black grosgrain ribbon approximately 2.5" long and tie a knot in the middle - this is the groom's bowtie.
Step 4: Glue the bow tie onto the 3/8" white grosgrain ribbon at the top of the champagne glass stem.
Step 5: Cut a 2.5" piece of the 3/8" white grosgrain ribbon.
Step 6: Cut three individual rhinestones off of the silver diamond mesh and glue them onto the 2.5" piece of the white 3/8" grosgrain ribbon.
Step 7: Glue the 2.5" piece of the white 3/8" grosgrain ribbon with rhinestones vertically onto the champagne glass (directly under the bow tie).
Step 8: Cut a 4" piece of the 3/8" red grosgrain ribbon.
Step 9: Fold the piece of red ribbon at a 90-degree angle so that about a 1/2" of the ribbon is hanging down.
Step 10: Roll the rest of the ribbon.
Step 11: Glue 3/8" red grosgrain ribbon rose to champagne flute next to the white 3/8" grosgrain ribbon with silver diamond mesh.
The Bride:
Step 1: Wrap 3/8" white grosgrain ribbon around the stem of the champagne flute.
Step 2: Cut strips of the silver diamond mesh, wrap and glue them to the top of the champagne flute stem leaving a little semicircle in the front.
Step 3: Cut one piece of the silver diamond flower mesh and glue it in the center of the semicircle.
Step 4: Cut a piece of white tulle that is approximately 4" long and tie it in a knot around the base of the champagne flute.
Step 5: Cut 4" pieces of white tulle and glue them to the tulle circle. Repeat until you have a nice thick "skirt/dress."
Step 6: Cheers! Looking for a great recipe to toast with? Try one of these signature wedding cocktails.
Want Smartyware® to match these bride & groom champagne flutes? Shop Victoria. Party Seriously, Smarties!